Schmitt MPN
Description
MPN centrifugal pump
Details:
- Design: Block construction
- Material: PVDF (polyvinylidene fluoride) or PP (polypropylene)
- delivery rate: 580 l/min
- delivery head: 31 m
- Motor power: 0.18 -3.0 KW
The pump housing of the MPN series is hermetically sealed. The impeller is driven contactlessly from the outside by magnetic force. All wetted parts made of solid PVDF or PP. Equipped with low-maintenance hydrodynamic plain bearings in the pairing PTFE-ceramic or SiC-SiC as well as high-quality permanent magnets.
Use of PVDF pumps up to 95°C with PP up to 80°C medium temperature. Electric actuators in three-phase or alternating current as well as in three-phase current explosion-proof or pressure-resistant design. All motors can also be supplied with abnormal voltages and frequencies. The performance curves were determined with 2-pole 50 Hz motors and with water, measured at 20°C.
Technical data
Advantages:
Absolutely leak-free as no rotating parts need to be sealed. Very low-maintenance due to wear-resistant hydrodynamic plain bearings. High chemical resistance is achieved by using fewer different materials. Can be used universally.
Application examples:
- Waver production
- PCB etching
- Waste water and water treatment
- Electroplating
- Laboratory technology
- Medical equipment
