A ZUWA impeller pump is versatile
The ZUWA impeller pump does not need to be filled before operation, as it is self-priming even when dry. It can be used up to a depth of three metres. Containers can be suctioned off almost to the last drop, and the liquid flow is smooth and pulsation-free.
ACOSTAR IMPELLER PUMPPlastic impeller pump, perfectly suited for viscous liquids as well as a wide variety of acids, alkalis, solvents and other process media |
UNISTAR IMPELLER PUMPThe universal pump for pumping clean or slightly contaminated liquids free of abrasive substances (therefore neither abrasive nor corrosive). |
|
COMBISTAR IMPELLER PUMPThe pump for all liquids that may also contain abrasives. Perfectly suited for pumping abrasive or slightly corrosive media. |
NIROSTAR IMPELLER PUMPHigh-quality stainless steel pump with a wide range of applications in industry and plant engineering, ideally suited to corrosive media. |
The centrepiece of the pump is a flexible rubber impeller. Depending on the model, these pumps can handle up to 730 litres per minute and build up a maximum pressure of four bar. A damaged impeller can be replaced quickly so that pumping only has to be interrupted for a short time.
The impeller of an impeller pump must never run dry for long periods (more than 30 seconds), otherwise the flexible blades may be damaged or even tear off. As long as there is a flow of liquid inside the pump, the impeller requires no further maintenance or lubrication. This pump is therefore ideal for long-lasting, uninterrupted pumping processes and can be used in the following industries, for example:
Food industry
Cosmetics
Chemical industry
Wastewater handling
Agriculture
Beverage production
Electroplating
Whether you want to pump waste water, antifreeze or other liquid media: With a quality impeller pump from ZUWA, you are optimally prepared for a wide range of applications.
